Description
Preorder Today!
Formulated for assembly and fabrication applications that require clear bond lines with no read through
Weld-On/SCIGRIP 46C is a two-component, clear, thixotropic, reactive acrylic adhesive for bonding primer-less aluminum or other metals and acrylics. Its characteristics make it an excellent choice for sign assembly and other fabrication or manufacturing uses where no sagging, short fixture times, and good clarity retention are required.
SIGN & DISPLAY MANUFACTURING
Weld-On/SCIGRIP 46C’s strong clear adhesive is a game changer when it comes to bonding trim cap to polycarbonate lettering. Because it cures clear, no bond lines show through when the sign is back lit.
Performance Benefits
| FEATURE BENEFIT | |
| Cures optically clear | Allows creation of bond lines with no read through |
| Short working and fixture times | Less waiting when assembling multi-stage projects |
| Primer-less metal bonding | Solvent cleaning only required on most metals |
| No-sag application | Reduced slide or sag even on inverted surfaces |
| High bond strength | Up to 2,200 lbs/in² after 24 hours (Aluminum) |
RECOMMENDED FOR BONDING
Formulated for bonding a variety of metals and plastics.
PRODUCT PROPERTIES (In Minutes)
| Cartridge | Adhesive | Activator | Working Time | Fixture Time |
| WO46C | WO46CA | WO46CB | 6 – 9 | 15 – 25 |
TYPICAL ADHESIVE CHARACTERISTICS @75°F (24°C)
| Weld-On 46C | Part A Adhesive | Part B Activator | A+B Mix |
| Color | Off White | Translucent | Cures Clear |
| Mix ratio/volume | 10 | 1 | – |
| Mix ratio/weight | 8.5 | 1 | – |
| Density, g/cc | 0.99 | 1.17 | 0.96 |
| Density, lb/gallon | 8.25 | 9.73 | 8.38 |
| Viscosity, cps1 | 75,000 – 125,000 | 2,500 – 4,500 | – |
TYPICAL BOND STRENGTH @75°F (24°C)
| Substrate | Aged Bond Strength, lbs/in2 (MPA) | Failure Mode |
| Aluminum | 2,200 (15.2) | Thin Layer Cohesive |
| Cold Rolled Steel | 2,200 (15.2) | Cohesive |
| Stainless Steel | 1,900 (13.1) | Thin Layer Cohesive |
| Acrylic | 800 (5.5) | Substrate Break |
| Polycarbonate | 750 (5.2) | Substrate Break |
| PVC | 600 (4.1) | Substrate Break |
| VEFRP | 1,800 (12.4) | Fiber Tear |
| Aluminum
to Acrylic |
800 (5.5) | Substrate Break
(Acrylic) |
| Cold Rolled Steel
to Acrylic |
800 (5.5) | Substrate Break
(Acrylic) |
| Polycarbonate
to Acrylic |
800 (5.5) | Substrate Break
(Acrylic) |
Reviews
There are no reviews yet.