Description
PERMABOND® 3D Series are low odour, low bloom 3D print infiltrants for toughening 3D printed parts. The full range of products allow the ideal features for each application.
Features & Benefits
Single component – no mixing required
Low odour – ideal for use in dip baths
Solvent-free – to minimise workplace hazard
Adds strength and improves printed part durability
Moisture cure mechanism
No curing equipment required
Fills porosities
Easy to apply either as “on the spot” coating or in a dip bath
For use on simple or complex, small or large parts
Clear, colourless appearance
Tack-free finish
100% reactive, no solvents
Parts can be bonded, sanded or painted after infiltration
Single component – no mixing required
Low odour – ideal for use in dip baths
Solvent-free – to minimise workplace hazard
Adds strength and improves printed part durability
Moisture cure mechanism
No curing equipment required
Fills porosities
Easy to apply either as “on the spot” coating or in a dip bath
For use on simple or complex, small or large parts
Clear, colourless appearance
Tack-free finish
100% reactive, no solvents
Parts can be bonded, sanded or painted after infiltration
|
Chemical composition |
Alkoxyethyl cyanoacrylate |
|
Appearance |
Colourless |
|
Specific gravity |
1.1 |
|
Temperature resistance |
-55 to +82°C (-65 to +180°F) |
|
Speed |
Fast Cure |
|
Surface |
Shiny Surface |
|
Features |
Good Penetration Product Provides Brilliant Color |
|
Viscosity |
Low 10-20 mPa.s cPs |
|
Tensile Strength* |
13 N/mm² (1900 psi) |
Reviews
There are no reviews yet.