Lord 7800 A/C 1:1 Fast Cure Urethane

Description

LORD® 7800 adhesive is an equal-mix, two-component urethane adhesive system used to bond composites,SMC and plastics with little surface preparation. This adhesive will also bond painted metals, such as powder-coated, primed and e-coated. LORD 7800 adhesive system offers a range of working times by shifting between LORD 7800 curatives, accommodating a wide variety of process requirements while retaining the same mechanical and adhesion properties.

Shelf Life

Shelf life of each component is six months when stored in a clean, dry environment at 65-85°F (18-30°C) in original, unopened container.

After opening, protect adhesive from excessive exposure to moisture by installing desiccant cartridges and/or using dry nitrogen as an inert cover.

Features and Benefits

Rapid Cure Strength – provides rapid, outstanding cure strength development, allowing for faster manufacturing and processing.

Consistent Cure Speeds – low exotherm cure (rate of cure less affected by bondline thickness).

Low Tooling Temperature – allows accelerated cure with low heat up to 220°F (104°C), eliminating quality issues from ‘cold spots’ seen with other adhesives.

Enhanced Regulatory Profile – free of heavy metals.

Environmentally Recommended – does not contain ozone depleting chemicals.

Environmentally Resistant – resists weathering, humidity and salt spray.

Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.

50 ml	200 ml	600 ml
Chem-Set™ PAK-50 Gun	Newborn VR200XSP Dispensing Gun	Newborn VR400XSP Applicator Gun
TAH 190-620 Static Mixer	Sulzer MFHX-10-24T Static Mixer	Sulzer MFHX-10-24T Static Mixer