Chem-Set Stone Seam Tape – 1″ x 200′ Roll

Description

Stone Seam Tape is part of an innovative finishing system for deck seams. Installers often spend a lot of time and energy removing excess adhesive from their joints with a razor blade, going back and forth over the length of the seam over and over, shaving a little bit of glue with each pass.

With the Stone Seam Tape, much of this time is eliminated, using the tape to “squeegee” out most of the excess before the glue is dry.

Stone Seam Tape comes in a 1″ x 200′ roll. It has a glossy side and a matte side which transfers to the joint allowing you to create the right finish for high gloss or leathered/textured surfaces. 

Using Stone Seam Tape is easy. Simply — 

1. Apply Stone Seam adhesive to the joint and pull it together
2. Cut a length of tape to fit your seam
3. Place the tape on the surface (choose gloss or matte side depending on the surface)
4. Use a metal or plastic razor to “squeegee out” as much excess adhesive as possible
5. Allow to cure until nearly hardened. The glue should be dry to the touch but still flexible
6. Remove the tape
7. Holding the razor at a 45° angle, remove excess adhesive on the surface. It should come off easily in long sections
8. Your seam is complete and flush with the surface without all the scraping 

Stone Seam is a two-part methacrylate, clear acrylic seaming adhesive designed for the inconspicuous bonding of various substrates, including hard surface products such as granite, engineered stone, quartz, marble, cultured marble, glass, sintered stone, porcelain, and various ceramic surfaces with generally no preparation effort. 

Features:

• Available in flowing and knife-grade 
• Fast working times
• Fast fixture time
• High clarity/ Non-yellowing
• Strong bonds to quartz, granite, marble, porcelain, and ceramics
• Forgiving Formula
• High UV stability – rated for indoor and outdoor applications
• Simple, reliable, and repeatable color system
• Can be used with Wet Glue Transfer System – High Gloss and Matte

Characteristics:

• Working Time: 4 to 6 minutes (at 75°F/ 24°C)
• Fixture Time: 12 to 15 minutes (at 75°F/ 24°C)
• Can be Moved In 20 minutes
• Operating Temp.: 65°F to 85°F (18°C to 30°C)
• Gap Filling: .125 inches
• Mixed Density: 8.1 lbs./gal (.96 g/cc)
• Flash Point: 51°F (11°C)