Description
Pacer Technology’s RX Series Range Extended cyanoacrylate adhesives are a family of non-surface sensitive adhesives for porous, acidic, contaminated, or hard-to-bond substrates, such as certain plastics and plated surfaces. Viscosities range from water-thin to a non-running gel to fit a variety of application requirements.
- SLOW CURE: Bridges gaps, allows work piece alignment
- 1500cP viscosity allows up to .010″ gap fill capability
- Meets MIL-A-46050C Type II, Class 3
Liquid State:
| Base Chemical | Ethyl Hybrid Cyanoacrylate |
| Color | Translucent Liquid |
| Viscosity, cP | 350-550 |
| Flashpoint, F (C) | 185 (85) |
| Vapor Pressure (mmHg @ 70C) | 8 |
| Specific Gravity (@25F) | 1.08 |
| Soluble in: | Acetone, MEK |
Cured State:
| Temperature Range | -65F to +180 F (-54C to 82C) |
| Hardness, Rockwell (M) | 74 |
| Outgassing (@ 10^-6 mmHg, 72F | 0 |
| Typical Gap, inches | 0.008 |
| Softening Point, F (C) | 306 (152) |
| Melting Point, F (C) | 365 (185) |
| Glass Transition, F (C) | 347 (175) |
| Soluble in: | X-9 Debonder, Acetone, Nitropropane |
Strength Data:
| Shear Strength, psi, ASTM D-1002 | |
| Steel | 2300 (±10%) |
| Aluminum | 1600 (±10%) |
| Copper | 1400 (±10%) |
| ABS | SF* |
| Rigid PVC | SF* |
| Nylon | SF* |
| Polycarbonate | SF* |
| SBR | SF* |
| EPDM | SF* |
| Tensile, steel, psi, ASTM-D2095 | 4000 (±10%) |
| Dielectric Constant (1MC) | 3.98 |
| Volume Resistivity (ohm-cm) | 8.4×10^12 |
*substrate failure (adhesive bond stronger than substrate)
Reviews
There are no reviews yet.